Memory Function - Ford F-150 Owner's Manual

MEMORY FUNCTION (IF EQUIPPED)
WARNING: Before activating the seat memory, make sure that
the area immediately surrounding the seat is clear of obstructions
and that all occupants are clear of moving parts.
WARNING: Do not use the memory store function when your
vehicle is moving.
This feature will save and recall the position of the driver seat, power
mirrors, power adjustable foot pedals (if equipped), and steering column
(if equipped).
The driver memory seat control is located on the left side of
the driver's seat.
1
2
Programming Memory Positions
1. To program position 1, move the memory features to the desired
positions using the associated controls.
2. Press and hold memory button 1 for about two seconds. A chime will
sound confirming that a memory position has been set.
To program position 2, repeat the previous procedure using memory
button 2.
A memory position may be programmed at any time.
To program the memory feature to a remote entry transmitter, see the
Keys and Remote Control chapter.
Recalling Saved Memory Positions
To recall position 1 settings, press and release memory button 1. The
memory features will move to the saved memory 1 position.
The memory positions are also recalled when you press your remote
entry transmitter unlock button (if the transmitter is programmed to a
memory position) or, when you enter a valid personal entry code that is
2013 F-150 (f12)
Owners Guide gf, 1st Printing
USA (fus)
Seats 165