Casio 5338 Operation Manual

© 2013 CASIO COMPUTER CO., LTD.
MA1304-EA
About This Manual
E-2
Contents
E-2 About This Manual
E-3 Things to check before using the watch
E-7 Mode Reference Guide
E-11 Timekeeping
E-12 Confi guring Home City Settings
E-12 To confi gure Home City settings
E-14 To change the Daylight Saving Time (summer time) setting
E-15 Adjusting the Digital Time and Date Settings
E-15 To confi gure the digital time and date settings
E-19 Checking the Current Time in a Different Time Zone
E-19 To enter the World Time Mode
E-19 To view the time in another time zone
E-4
E-30 To perform a countdown timer operation
E-30 To stop the alarm
E-31 Adjusting the Analog Hand Setting
E-31 To adjust the analog time
E-33 Illumination
E-33 To turn on illumination
E-34 Button Operation Tone
E-34 To turn the button operation tone on and off
E-35 Troubleshooting
E-36 Main Indicators
E-38 Specifi cations
E-6
Selecting a Mode

Press C to cycle between the modes as shown below.
Timekeeping Mode
E-8
Operation Guide 5338
 Depending on the model of your watch, display text
appears either as dark fi gures on a light background, or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
 Button operations are indicated using the letters shown in
the illustration.
 Note that the product illustrations in this manual are
intended for reference only, and so the actual product may
appear somewhat different than depicted by an illustration.
World Time Mode
C
Congratulations upon your selection of this CASIO watch.
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under "To confi gure Home City settings" (page E-12) to confi gure
your Home City and daylight saving time settings.
Important!

Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
 See "Adjusting the Digital Time and Date Settings" (page E-15).
The watch is now ready for use.
E-20 To specify standard time or daylight saving time (DST) for a city
E-21 Using the Alarm
E-22 To enter the Alarm Mode
E-22 To set an alarm time
E-23 To test the alarm
E-24 To turn an alarm and the Hourly Time Signal on and off
E-24 To stop the alarm
E-25 Using the Stopwatch
E-25 To enter the Stopwatch Mode
E-26 To perform an elapsed time operation
E-26 To pause at a split time
E-26 To measure two fi nishes
E-28 Countdown Timer
E-28 To enter the Countdown Timer Mode
E-29 To confi gure the countdown timer
Mode Reference Guide
Your watch has 5 "modes". The mode you should select depends on what you
want to do.
To do this:
 View the current date in the Home City
 Confi gure Home City and daylight saving time (DST)
settings
 Confi gure time and date settings
 Select 12-hour or 24-hour timekeeping

Adjust the analog hands
View the current time in one of 48 cities
(29 time zones) around the globe
Set an alarm time
Use the stopwatch to measure elapsed time
Use the countdown timer
 In any mode (except when a setting mode, with fl ashing digits is on the display),
press B to illuminate the display.
Alarm Mode
C
C
Enter this mode:
Timekeeping Mode
World Time Mode
Alarm Mode
Stopwatch Mode
Countdown Timer Mode
Stopwatch Mode Countdown Timer Mode
C C
ENGLISH
E-1
E-3
E-5
See:
E-11
E-19
E-21
E-25
E-28
E-7
E-9