Casio 5338 User Manual

MA1804-EA © 2018 CASIO COMPUTER CO., LTD.
For a full Operation Guide and Q&A
information about this product, go to the
website below.
http://world.casio.com/manual/wat/
E-2
2. Press C to move the flashing in the sequence shown below to select a setting.
C
Seconds
C
Day
C
Month
C
E-4
Mode Selection and Operations
Press C to change the mode.
Timekeeping Mode
Turns on illumination.
E-6
Adjusting the Analog Hand Setting
Use the operations below to adjust the analog hands so their settings match the
digital time.
E-8
User's Guide 5338
Summer Time and Home City
C C
DST Home City Code
Year 12/24-Hour Format
C
Time and Date
World Time Mode
C
D (three seconds in Timekeeping Mode): Enters analog
hand setting mode.
D: Advances minute hand 20 seconds.
B: (while holding down D): Locks high-speed hand
movement.
A: Exits analog hand setting mode.
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under "Operating Precautions" and "User Maintenance".
Be sure to keep all user documentation handy for future reference.
Important!
This manual provides a brief overview of your watch.
Configuring Home City, Time and Date Settings
Configure Home City and summer time settings first. After that, configure time and
date settings.
1. In the Timekeeping Mode, hold down A for about two seconds until the seconds
start to flash. This is the setting mode.
3. Use B and D to change the selected setting.
Screen
Hour
C
Minute
C
4. Press A to exit the setting screen.
Alarm Mode
C
Scrolls between
cities.
C
Specifications
Accuracy at normal temperature:
Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Alarms: 5 daily alarms (with 1 snooze alarm); Hourly time signal
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59'59.99"
Measuring modes: Elapsed time, split time, two finishes
This setting item:
Press D.
Reset the seconds to 00
Toggle between Daylight Saving Time (ON)
Press D.
and Standard Time (OFF)
Use D (East) and B (West).
Change the city code
Use D (+) and B (–).
Change the hour or minute
Toggle between 12-hour (12H) and 24-hour
Press D.
(24H) timekeeping
Use D (+) and B (–).
Change the year, month, or day
Stopwatch Mode
Split/Reset
C
Countdown Timer Mode
±
30 seconds a month
week
ENGLISH
E-1
E-3
Operation
E-5
Start/Stop
C
E-7
E-9