Setting the language ........................10 Using the vocal menus ........................ 10 Establishing a Bluetooth connection with a phone ................11 Using a phone with the Parrot RKi8400 for the first time ............11 Managing Bluetooth devices ....................... 12 Synchronizing the phonebook ....................... 14 Display settings .............................
Page 3
Using the Parrot RKi8400 with an SD card ................. 29 Using the Parrot RKi8400 with a USB device ................30 Using the Parrot RKi8400 with an audio player connected via Bluetooth ........31 Using the Parrot RKi8400 with an analogue audio player ............32 Commands ............................
Checking the necessity of an ISO adapter Try to connect the audio and power connectors of the Parrot RKi8400 to the connectors of your vehicle. If this connection is impossible, you have to obtain an ISO adapter before installing the Parrot RKi8400.
Always test and verify all connections using suitable test equipment before connecting the Parrot RKi8400 to the vehicle. 1. Insert the Parrot RKi8400 cage and fix it into the dash board using the bracket mounting tabs. 2. Access the vehicles car stereo wiring harness from behind the dashboard.
Indeed, the red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V ignition and the black wire to the ground. This can be done simply by reversing both fuse holders located on the Parrot wiring. Installing the microphone...
Page 7
D < 60 cm α < 45° Make sure the microphone is not exposed to the air stream from air vents. Do not install the microphone cable in heating, ventilation or air conditioning systems. Be careful of the side airbags and SRS systems while running the microphone cable.
Removing the To remove the faceplate, press the eject faceplate button in the top left. WARNING: Always make sure the Parrot RKi8400 is switched off before removing the faceplate. Removing the car To remove the entire car stereo: stereo 1. Remove the faceplate.
Commands Accessing the main Press the central jog wheel to access the menus. menu > The Parrot RKi8400 says the name of the current menu. Turn the jog wheel to browse through the menus. Browsing through the menus Press the button to get back to the previous menu.
Setting the language If you wish to change the language of the Parrot RKi8400: 1. Press the jog wheel and select Settings > Language. 2. Use the jog wheel to select your language and press the jog wheel to confirm.
Parrot RKi8400. phone Adjusting the kit Before pairing your phone with the Parrot RKi8400, make sure that it is visible visibility by all Bluetooth ® devices. To do so press the jog wheel and select Settings >...
Connecting an The Parrot RKi8400 automatically connects itself to the last phone you used already used with it. If you want to connect the Parrot RKi8400 to another phone you already phone paired: 1. Press the jog wheel and select Settings >...
Page 13
Managing the You can pair up to 10 devices with the Parrot RKi8400. “Memory full” problem If you attempt to pair an 11th phone, you will get the « Memory full » message. You must then delete a phone from the paired devices list. To do so: 1.
If your phone doesn’t support automatic synchronization, you can also send Sending contacts via contacts from your mobile to the Parrot RKi8400 via Object Push. To do so: Object Push 1. Press the jog wheel and select Telephone > Receive contacts.
Page 15
Deleting a Note You can only delete contacts sent manually (via Object Push). contact 1. Press the jog wheel and select Phone > Contacts management. 2. Select the contact your want to delete. 3. Press the jog wheel and select Delete contact.
3. Press the jog wheel to confirm. Changing the wallpaper You can change the wallpaper of the Parrot RKi8400 by selecting one of the wallpapers proposed by default. You can also customize it by sending a picture directly to the kit.
Page 17
Deleting a wallpaper To delete a picture sent to the Parrot RKi8400 as wallpaper, press the jog wheel and select Settings > Display > Wallpaper > Custom > Delete.
Phone Before using your Parrot RKi8400 telephone function, you first have to connect it with your phone / PDA. ► For more information,refer to the Establishing a Bluetooth connection with a phone section WARNING: The availability of several functionalities only depends on the model of your mobile phone.
Parrot RKi8400 for two seconds to redial dialled number the last dialled number. Using the speed dial The Parrot RKi8400 allows you to assign a key of the numerical pad to one of your contact. To do so: function 1. Press the jog wheel and select Telephone >...
Phonebook > Call history to access the list of missed, dialled and received calls. You can then call the selected contact by pressing the button. Note : The call history will only display the list of calls made using the Parrot RKi8400.
Receiving a call An incoming call is indicated by a ringtone. The name of the caller is announced if their details are stored in the phonebook of the phone connected to the Parrot RKi8400. Note : You can also associate a picture to a contact. This picture will be displayed each time you receive a call from this contact.
DTMF is a mechanism for navigating voice user interfaces using the phone's numeric keypad. This signal allows you to manage your voice mail using the Parrot RKi8400. Use the numeric keypad of the Parrot RKi8400 to send DTMFs while on call. Ending a call Press the button to end a call.
- Make sure the picture is in JPG format. - The picture weight must be less than 1Mb. 4. From your Bluetooth device, send the picture via Bluetooth to the Parrot RKi8400. ► Refer to the user guide of your device for more information.
Page 24
Modifying the You can activate / deactivate the contacts pictures display while browsing phonebook style through your phonebook. To do so: 1. Press the jog wheel and select Telephone > Advanced settings > Phonebok style. 2. Select With picture Without picture.
#31#. 2. Select Activate. Voice recognition The Parrot RKi8400 allows you to use the voice recognition of your phone (if your phone supports this feature). To do so, press the jogwheel and select Telephone > Voice commands > Select voice recognition.
Music Using the radio Selecting a station Selecting a band 1. Press the SOURCE button until the Radio source is selected. 2. Press the button and use the jog wheel to select bands in the following order FM1, FM2, FM3 and AM. Selecting a frequency Press briefly the buttons to change manually the radio station.
Modifying the radio parameters To modify the radio parameters: 1. Press the jog wheel and select Radio > settings. 2. Adjust your settings using the jog wheel. Option Description seek and store the 12 radio stations with the highest RF level in the Auto store current band activate / deactivate the RDS scan which allows to change...
/ iPhone. 3. Select the song and press the jog wheel. If your iPod is connected to the Parrot RKi8400 via a Jack / Jack cable, refer to the Using the Parrot RKi8400 with an analogue player section.
SD card 2. Connect the Parrot RKi8400 to your computer using a USB / mini-USB cable. 3. Copy your music files in MP3 or WMA formats as if it was a USB flash drive.
Using the Parrot RKi8400 with a USB device WARNING: If your Parrot RKi8400 is connected to an iPod / iPhone and a USB flash drive simultaneously, the iPod / iPhone has priority : you can only browse through the content of your iPod / iPhone.
3. Select the song and press the jog wheel. Using the Parrot RKi8400 with an audio player connected via Bluetooth Note : The Parrot RKi8400 allows you to use the telephone and audio streaming functions from 2 different phones without having to disconnect one of them. Compatibility You can use the Parrot RKi8400 to listen to songs stored on your mobile phone / PDA / smartphone.
Use a Jack / Jack cable to connect an analogue audio player (ex CD player) to the Parrot RKi8400. RCA Connection You can also use the Line In connector located at the back of the Parrot RKi8400. To do so, press the jog wheel and select Line In >...
Commands To do so Proceed this way Pause a song Press the button. Resume playback Press the button. Raise or lower the volume Turn the jog wheel. Rewind or fast-forward Hold down the button. Restart a song Press the button. Skip to the next song Press the button.
If no picture is included in the tags of your audio files (MP3 ID3v2), you can to an album add a picture in .jpg format in the corresponding folder. If various pictures are in this folder, the Parrot RKi8400 primarily displays the “cover.jpg” one. WARNING : The picture size needs to be less than 1Mb.
Page 35
RKi8400 to repeat songs 2. Activate or deactivate the option by pressing the jog wheel. Note : If you are using the Parrot RKi8400 with an iPod / iPhone, select Audio effects > Settings > Repetition (iPod). Setting the Parrot...