Web Configuration; Logging In - EnGenius EAP-3660 User Manual

EAP-3660 11b/g Wireless Access Point

3 Web Configuration

Logging In

To configure the device through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the Bridge and your computers are on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
Username：admin; Password：admin
After logging in you will see the graphical user
interface (GUI) of the device. The navigation drop-
down menu on left is divided into four main sections:
1. Status: This includes the main status page, DHCP
client list, and system log.
2. System: This includes the system properties and
IP settings.
Wireless: This includes the basic, advanced,
3.
security, WDS, and MAC filter for the wireless
interface.
Management : This includes the administrator
4.
password settings, VLAN and SNMP settings,
backup/restore configuration, firmware upgrade, time
settings, and the system log.
The status page is also displayed once you have
logged in. This includes details about the system,
wireless, and TCP/IP configuration.
Version 1.1
12