TP-Link TL-ER5120 User Manual page 32

Subnet Mask:
Default Gateway:
Primary DNS/Secondary DNS:
Upstream Bandwidth:
Downstream Bandwidth:
PPTP Status
Status:
IP Address:
Primary DNS:
Secondary DNS:
If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN port
obtained is displayed.
If Static IP is selected, configure the default gateway. If
Dynamic IP is selected, the obtained default gateway is
displayed.
If Static IP is selected, configure the DNS. If Dynamic IP is
selected, the obtained DNS is displayed.
Specify the bandwidth for transmitting packets on the port.
Specify the bandwidth for receiving packets on the port.
Displays the status of PPTP connection.
"Disabled" indicates that the PPTP connection type is
not applied.
"Connecting" indicates that the router is obtaining the
IP parameters from your ISP.
"Connected" indicates that the router has successfully
obtained the IP parameters from your ISP.
"Disconnected" indicates that the connection has been
manually terminated or the request of the router has no
response from your ISP. Please ensure that your
settings are correct and your network is connected
well. Consult your ISP if this problem remains.
Displays the IP address assigned by your ISP.
Displays the IP address of your ISP's Primary DNS.
Displays the IP address of your ISP's Secondary DNS.
-26-