2)
Interface Bandwidth
Choose the menu Network→WAN→WAN1 to load the configuration page. Configure the Upstream
Bandwidth and Downstream Bandwidth of the interface as Figure 4-9 shows. The entered
bandwidth value should be consistent with the actual bandwidth value.
3)
Bandwidth Control Rule
Choose the menu Advanced→Traffic Control→Bandwidth Control to load the configuration page.
Then continue with the following settings:
Settings:
Direction:
Group:
Mode:
Guaranteed Bandwidth (Up/Down):
Limited Bandwidth (Up/Down):
Effective Time:
Status:
Click the <Add> button to apply.
4.2.2.4
Session Limit
Choose the menu Advanced→Session Limit→Session Limit to load the configuration page. Check
the box before Enable Session Limit and click the <Save> button to apply. Then continue with the
following settings:
Settings:
Group:
LAN -> WAN1
group1
Individual
100
800
Keep the default value
Activate
Figure 4-10 Bandwidth Control Rule
group1
-118-