Installing The Wall Mount With A Metal Single-Gang Junction Box - Bosch VEZ-400 Installation Manual

12 en | Installing a Wall Mount
4.1.1 Installing the Wall Mount with a Metal Single-gang
Junction Box
Use the following instructions for applications using a metal
single-gang junction box. To mount directly onto a mounting
surface, refer to Section 4.1.2 Installing the Wall Mount directly
onto a Mounting Surface, page 14.
1.
WARNING!
The mounting surface, mounting screws/plugs, and junction
box must be stable and capable of supporting a maximum load
of 15 kg (33 pounds). Mounting to an improper surface or using
improper mounting material can cause camera malfunction and
is a potential safety hazard.
Figure 4.1 Wall Mount Dimensions
2.
3.
F.01U.260.456 | 1.0 | 2011.10
Determine a secure location for the wall mount.
Fit a user-provided metal single-gang junction box to the
wall. In moist, wet, or outdoor applications, ensure that
the junction box is rated accordingly.
Attach a grounded metal conduit to the junction box
clamp.
Installation Manual
Mini PTZ Dome Accessories
Bosch Security Systems, Inc.