Weslo Cadence C6 Treadmill User Manual page 13

CONSOLE DIAGRAM
Note: If there are thin sheets of plastic
on the console, remove the plastic.
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective.
While the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the displays will
provide continuous exercise feedback. You can even
measure your heart rate using the built-in pulse sensor.
The console also offers four speed programs. Each
program automatically controls the speed of the tread-
mill as it guides you through an effective workout.
To prevent damage to the walking platform, always
wear clean athletic shoes while using the treadmill.
During the first few minutes that the treadmill is
used, inspect the alignment of the walking belt, and
center the walking belt if necessary (see page 19).
Key
HOW TO TURN ON THE POWER
Plug in the power cord (see
page 12). Next, locate the
on/off switch on the treadmill
frame near the right upright.
Make sure that the switch is
in the "on" position.
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothes. Then,
insert the key into the console. After a moment, the
three displays will light. Important: In an emergency
situation, the key can be pulled from the console,
causing the walking belt to slow to a stop. Test the
clip by carefully taking a few steps backward; if the
key is not pulled from the console, adjust the posi-
tion of the clip.
13
Clip
On
Position