Automatic Temperature Control; Air Conditioning (A/C) - Chrysler 300 Quick Reference Manual

Push
Rotate
Blower A/C
Button
Control

Automatic Temperature Control

AUToMATic oPErATion
Turn the mode control to the AUTo position and the blower
•
control to either Lo AUTo or HigH AUTo position.
Select the desired temperature by rotating the temperature control
•
for either driver or passenger.
The system will maintain the set temperature automatically.
•

Air condiTioning (A/c)

if the air conditioning button is pressed while in the AUTo mode,
•
the indicator light may flash three times to indicate the air
conditioning is being controlled automatically.
Air rEcircULATion
Use recirculation for maximum A/c operation.
•
For window defogging, push the air recirculation off.
•
if the recirculation button is pressed while in the AUTo mode,
•
the indicator light may flash three times to indicate the cabin air
is being controlled automatically.
uconnect
™
uconnect phone allows pairing a cellular phone equipped with
•
™
the Bluetooth
www.chrysler.com/uconnect website for supported phones.
refer to your owner's Manual for further information.
Universal Consumer Interface – iPod
An iPod can be plugged into the vehicle's audio system, using the
• ®
provided cable, through a connector located in the glove box.
refer to owner's Manual for operation.
Rotate
Driver Temp.
Control
phone
Hands-Free Profile, version 0.96 or higher. See the
®
Push Rear Rotate
Window Passenger
Defroster Temp.
Button Control
Rotate
Push
Air Recirc. Mode
Control
Button
®