Engine Coolant - Chevrolet Uplander Owner's Manual

Engine Coolant

The cooling system in your vehicle is filled with
®
DEX-COOL engine coolant. This coolant is designed
to remain in your vehicle for five years or 150,000 miles
(240 000 km), whichever occurs first, if you add only
®
DEX-COOL extended life coolant.
The following explains your cooling system and how to
add coolant when it is low. If you have a problem
with engine overheating, see Engine Overheating on
page 5-25.
A 50/50 mixture of clean, drinkable water and
®
DEX-COOL coolant will:
•
Give freezing protection down to 34°F ( 37°C).
•
Give boiling protection up to 265°F (129°C).
•
Protect against rust and corrosion.
•
Help keep the proper engine temperature.
•
Let the warning messages and gages work as
they should.
Notice: Using coolant other than DEX-COOL
cause premature engine, heater core or radiator
corrosion. In addition, the engine coolant may
require changing sooner, at 30,000 miles (50 000 km)
or 24 months, whichever occurs first. Any repairs
would not be covered by your warranty. Always use
®
DEX-COOL (silicate-free) coolant in your vehicle.
5-22
What Engine Coolant to Use
Use a mixture of one-half clean, drinkable water and
one-half DEX-COOL
aluminum parts. If you use this coolant mixture,
you do not need to add anything else.
CAUTION:
{
Adding only plain water to your cooling
system can be dangerous. Plain water, or
some other liquid such as alcohol, can boil
before the proper coolant mixture will. Your
vehicle's coolant warning system is set for the
proper coolant mixture. With plain water or the
wrong mixture, your engine could get too hot
but you would not get the overheat warning.
Your engine could catch fire and you or others
could be burned. Use a 50/50 mixture of clean,
®
may
drinkable water and DEX-COOL
®
coolant which will not damage
®
coolant.