Automatic Climate Control - BMW Z4 sDrive30i Owner's Manual

Automatic climate control*

1 Temperature, left side of passenger com‐
partment
2 Maximum cooling
3 Rear window defroster
4 Defrosting windows and removing conden‐
sation
5 Automatic recirculated air control/recircu‐
lated air mode
Comfortable interior climate
For almost all conditions, the AUTO program 7
offers the optimum air distribution and air flow
rate, refer to AUTO programs below. Select a
comfortable interior temperature only.
The following sections contain more detailed in‐
formation on the available setting options.
Most of these settings are stored for the remote
control currently in use,
tings, refer to page 29.
Air distribution, manual
Depending on the selected setting, the air is di‐
rected to the windshield, to the upper body area,
to the knee area and into the footwell.
Adjusting air distribution manually
Press the button repeatedly until
the air distribution is set as re‐
quired. The corresponding LED lights up.
The manual air distribution is also switched on
when the AUTO program is deactivated.
98
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
Personal Profile set‐
6 Manual air distribution
7 AUTO program
8 Air flow rate, manual, climate level
9 Temperature, right side of passenger com‐
partment
10 Switching cooling function on/off manually
Temperature
Set the desired temperatures indi‐
vidually for the driver's and passen‐
ger sides.
The automatic climate control ach‐
ieves this temperature as quickly as
possible regardless of the season, using maxi‐
mum cooling or heating power if necessary, and
then maintains it.
To give the automatic climate control enough
time to achieve the set temperature, do not
switch between different temperature settings
in quick succession.
Maximum heating power can be obtained with
the highest setting, regardless of the outside
temperature.
The lowest setting effects continuous cooling.
Switching the cooling function on and
off
The cooling function cools and de‐
humidifies the incoming air before
reheating it as required, according
to the temperature setting. This