Locking Manually - BMW Z4 sDrive30i Owner's Manual

rear wheels are blocked and the vehicle cannot
be towed.
Release the transmission lock manually for tow‐
ing only and set the parking brake beforehand to
prevent the vehicle from rolling. After parking
the vehicle, engage the transmission lock again
manually, refer to page
Manual release
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever un‐
til the sleeve is inside out.
3. Insert the Allen wrench from the
vehicle tool kit, refer to page 204,
cap.
4. Turn the cap with the Allen wrench, arrow 1,
and remove it, arrow 2.
5. Insert the Allen wrench into the opening, ar‐
row 1.
Turn the Allen wrench in the correct
direction.
Do not turn the Allen wrench in the opposite
direction as this may damage the mecha‐
nism.◀
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
61.
onboard
into the
6. Turn the Allen wrench as far as it will go, ar‐
row 2. The transmission lock is released.
7. Draw the Allen wrench out of the opening.
Locking the transmission lock again
After parking the vehicle, lock the trans‐
mission lock again to prevent the vehicle from
rolling.◀

Locking manually

1. Press the button, see arrow. The transmis‐
sion lock is locked again.
2. Clip the sleeve of the selector lever back in
place.
3. Set the parking brake.
Jump-starting, refer to page
to page 211.
210, towing, refer
61