Interior Lamps; Instrument Lighting - BMW Z4 sDrive30i Owner's Manual

▷ In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings.
▷ In tight curves, on hilltops or in depressions,
in cross traffic or half-obscured oncoming
traffic on freeways.
▷ In poorly-lit towns and cities and in the pres‐
ence of highly reflective signs.
▷ At low speeds.
▷ When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov‐
ered with stickers, etc.
Sensor view field
The view field of the sensor is located on the
front of the interior rearview mirror.
Do not cover this area with stickers, etc.
Clean the view field, refer to page
Switching off via iDrive
1. "Settings"
2. "Lighting"
3. "High beam assistant"
The setting is stored for the remote control cur‐
rently in use.

Instrument lighting

The parking lamps or low beams must be
switched on to adjust the brightness.
78
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
1. Push button 1 up or down repeatedly until
the appropriate symbol appears in the dis‐
play, accompanied by the brightness setting
and the word "SET".
2. Press button 2.
217.
3. Push button 1 up or down to select the de‐
sired brightness level.
4. Press button 2.
The display again shows the outside tem‐
perature and the time.

Interior lamps

The interior lamps, footwell lamps*, entry
lamps*, trunk lamp, and courtesy lamps* are
controlled automatically.
The LEDs for the courtesy lamps* are set in the
door handles and illuminate the ground in front
of the doors.
To avoid draining the battery, all lamps inside
the car are switched off about 8 minutes after
the ignition is switched off,
refer to page
Start/Stop button,
50.