ZyXEL Communications P-873HNU-51B User Manual page 291

Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
Click the Red Hat button (located on the bottom left corner), select System Setting and click
1
Network.
Figure 167 Red Hat 9.0: KDE: Network Configuration: Devices
Double-click on the profile of the network card you wish to configure. The Ethernet Device
2
General screen displays as shown.
Figure 168 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address settings with and
select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in the Address,
Subnet mask, and Default Gateway Address fields.
Click OK to save the changes and close the Ethernet Device General screen.
3
P-873HNU(P)-51B User's Guide
Appendix A Setting up Your Computer's IP Address
291