Access To The Water Circuit; Removing The - Ariston microGENUS HE 24 MFFI Installation And Servicing Instructions

6.5 A
CCESS TO THE
Important! Before any component is removed, the boiler
must be drained of all water.
6.5.1 Removing the D.H.W. (secondary) exchanger
1.Remove the condensate trap - see Section. 6.3.10;
2.Remove the screws "A6" (F
3.Disconnect the cable "A7" (F
4.Push the insulation of the exchanger towards the rear
of the boiler, and lift upwards and remove from the
front of the boiler (F
IG
5.Push the exchanger towards the rear of the boiler, and
lift upwards and remove from the front of the boiler
(F 6.51);
IG
6.Before replacing the exchanger ensure that the O-rings
are in good condition and replace if necessary.
A6
A7
W C
ATER IRCUIT
6.48);
IG
6.49);
IG
6.50);
A6
F . 6.48
IG
F . 6.49
IG
F . 6.50
IG
F . 6.51
IG
51