Advertisement
Operation
WARNING: This electric
firebox must be properly installed
before it is used.
Manual Controls
Three switches provide a choice
of heat settings. A switch is in the
ON position when the side with
the markings on (i.e. I, II, or II) is
pushed in. (Figure 1)
Switch 1
(I) Manual mode: Controls the
electricity supply to the heater
and flame manually.
(II)Remote mode: Allows the
control of electricity supply to
the heater and flame through
the use of the supplied remote
control.
!
NOTE: This switch must
be in either (I) or (II) to operate
with or without heat.
Switch 2 (I) Provides 715 Watt
heat output.
Switch 3 (II) Provides 1430 Watt
Figure 1
8
heat output with Switch 2.
Remote Operation
The fireplace is supplied with an
integral ON/OFF remote control.
!
NOTE: Ensure that the
fireplace 3-Position is set to the
remote control setting (i.e. II).
To operate: push ON button
to turn fireplace on; push OFF
button to turn fireplace off.
!
NOTE: Remote control
operates main power supply.
Heat must still be controlled by
switches on fireplace.
Resetting The Tempera-
ture Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
3-Position Switch to OFF ("O")
and waiting five (5) minutes
before switching the unit back on.
3
2
www.dimplex.com
1
Hide quick links:
Advertisement
