Looking Inside - Kenmore 970-4204 Use & Care Manual

Looking Inside

CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
1. Remove shelf by pulling forward to stop position.
2. Lift front edge up and pull out.
To replace shelf, rest side edges on any pair of shelf rails
and carefully push shelf back into position.
Sliding Glass Shelf
Door storage
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items
can be quickly selected.
Some models have door racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
The dairy compartment,
which is warmer than
the general food storage
section, is intended for short
term storage of cheese,
spreads, or butter.
To adjust cantilever shelves:
Replace the shelf by inserting the hooks at rear of the shelf
into the wall bracket. Lower the shelf into the desired slots
and lock into position.
SpillProof
accidental spills. In some models, the SpillProof
slide out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets.
Just pull the front of the shelf forward. The shelf can be
extended as far as the stopper will allow but it is not
removable from the cantilever bracket.
Sliding Wire Shelf
Adjustable door bins
Some models have adjustable door bins that can be
moved to suit individual needs.
To move door bins:
Door Rack
14
NOTE
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either
glass or wire.
1. Lift front edge up.
2. Pull shelf out.
TM glass shelves (some models) catch and hold
1
2
Full Width Cantilever
Glass Shelf
1. Lift bin straight
up.
2. Remove bin.
3. Place bin
in desired
position.
4. Lower bin
onto supports
until locked in
place.
TM shelves
1
2
Cantilever Glass Shelf
Fixed and Sliding