Page 8
CR550 Ensure motor is engaged Press and hold black button Flashing orange LED courtesy LED dim Use the black button to adjust up (use purple down to adjust if required) Press start button located on the bottom of motor, then immediately press the purple button.
Page 9
Press the purple learn button twice FAST flashing orange LED Press the green start button to open the door. Press the green start button to close the door. 40mm test obstacle...
Page 10
IR Beams must be installed to detect a 100mm high obstacle at any point along the floor. Red LED Red LED MUST BE ON MUST BE ON IR Beam IR Beam Protector System (IR Beams) white white/black wires wires twisted twisted together together...
Page 12
Learn button programming Press the purple Limits (learn) button, orange LED will light Enter 4 digit PIN at keypad (within 30s) Orange LED will turn off and courtesy LEDs will Learn Limits flash once Programming via multi-function control panel Enter 4 digit PIN at keypad (within 30s) Press and hold down LIGHT button on the...
Page 16
NB: The Australian Garage Door Association directs attention to consumers to maintain your garage door in good running order it is important your door is serviced by a professional garage door technician every 12 months or earlier as conditions may require.