Playing Audio; Incoming Call; Disconnecting/Reconnecting; Out Of Range Or Lost Signal - Altec Lansing The Jacket IMW455 Owner's Manual

Playing Audio from Your Bluetooth Device
1. Once your media device is connected to the unit, simply start playing the music, movie or game and all the
audio will automatically be played through iMW455.
2. Press "POWER" to play/pause the audio.
3. Press + or - to adjust the volume level of the unit.
4. Keep in mind that the iMW455 has a 30 foot Bluetooth wireless range.
Note: The volume controls on your media device work separately from the volume controls on iMW455.
When there is an incoming call:
1. Press "POWER" to pick up the call.
2. Press and hold "POWER" to reject the call.
3. During a call: Press "POWER" again to hang up the call.
To Disconnect Your Bluetooth Device
Turn off the connected device or press Volume "+" and "-"at same time to disconnect the Bluetooth device.
*The Blue Bluetooth indicator flashes slowly after disconnect the device.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature on your device, the unit will disconnect from your
device. To reconnect, simply access the Bluetooth Manager on your device and select iMW455.
You will not be asked to enter the PIN code again. or press Volume "+" and "-" at same time to reconnect the
Bluetooth device.

Out of Range or Lost Signal

If the music device is out of range (beyond 30 feet) of the unit or if there is something blocking the Bluetooth
signal, the LED light will flash slowly to indicate that the Bluetooth connection with the music device has been
lost.