13. Disconnect the 4 wire harness connectors.
14. Disconnect the 4 wire harness connectors.
15. Remove the battery service hole cover.
(1)
Using the service plug grip, remove the
battery cover lock striker.
Hint:
Insert the projecting part of the service plug
grip and turn the button of the battery cover
lock striker counterclockwise to release the
lock.
(2) Remove the 2 bolts and battery service
hole cover.
16. Disconnect the 3 frame wires.
(1)
Remove the 2 nuts to remove the 2 frame
wires from the hybrid battery junction
block assembly.
(2)
Remove the bolt and disconnect the
connector.
Caution:
Wear insulated gloves.
Notice:
Insulate the terminals of the removed frame wire with insulating tape.
24