Assigning An Ip Address - Bosch VIP-X1600-XFM4A Quick Installation Manual

VIP X1600 XFM4
5 Configuration
5.1

Assigning an IP Address

–
–
–
–
Note:
The module must be assigned a valid IP address and a matching
subnet mask to operate on your network.
Bosch Security Systems
If you have not already done so, install the
Configuration Manager program from the product CD. The
product CD is included in the scope of delivery for the
base.
Start Configuration Manager when the installation is
completed. The network is scanned for compatible devices
automatically.
If the module is displayed in the list, right-click the entry
and then click Unit network settings... in the popup menu.
Enter the desired IP address (e.g. 192.168.0.116) in the
Unit IP address field and click OK. The module is rebooted
and the IP address is valid.
Quick Installation Guide
Configuration | en
F.01U.088.580 | V4.0 | 2009.03
10