VIP X1600 XFM4
5
Configuration
5.1
Assigning an IP Address
–
If you have not already done so, install the
Configuration Manager program from the product CD. The
product CD is included in the scope of delivery for the
base.
–
Start Configuration Manager when the installation is
completed. The network is scanned for compatible devices
automatically.
–
If the module is displayed in the list, right-click the entry
and then click Unit network settings... in the popup menu.
–
Enter the desired IP address (e.g. 192.168.0.116) in the
Unit IP address field and click OK. The module is rebooted
and the IP address is valid.
Note:
The module must be assigned a valid IP address and a matching
subnet mask to operate on your network.
Bosch Security Systems
All manuals and user guides at all-guides.com
Quick Installation Guide
Configuration | en
F.01U.088.580 | V4.0 | 2009.03
10