Bosch VIP-X1600-XFM4A Quick Installation Manual page 7

7 en | Installing and Connecting
4.3 Alarm and Switch Connections
–
–
–
CAUTION!
!
A maximum load of 30 V and 500 mA may be applied to the relay
contact.
F.01U.088.580 | V4.0 | 2009.03
Connect the alarm lines to terminals lN1 to IN4 and GND
on the 8-pin terminal block.
Connect the relay lines to the two R1 terminals on the 8-
pin terminal block.
Secure the terminal block onto the left-hand part of the
male multipoint connector.
Quick Installation Guide
VIP X1600 XFM4
Bosch Security Systems