Bosch DVA-12T Installation Manual page 42

42 en | Subsystem Maintenance and Upgrading
Fig. 6.12 Drive Tray Key-Lock Rotation
4.
5.
Fig. 6.13 Removing the SATA Hard Drive
6.
F.01U.027.798 | V1 | 2006.06
Remove the drive tray with the hard drive. Once the drive tray is dislodged from the chas-
sis, gently and carefully withdraw the drive tray with hard drive from the chassis.
Remove the retention screws. The hard drive is secured to the drive tray with four (4)
retention screws (two on each side.) To remove the hard drive, these retention screws
must be removed. (See Figure 6.13)
Install the new hard drive.
RAID Subsystem DVA-12T | Installation Manual
Bosch Security Systems