System Setup Operation - Alpine PKG-1000 Owner's Manual

Dvd rear seat entertainment package
Hide thumbs Also See for PKG-1000:
Table of Contents

Advertisement

Available languages

Available languages

System Setup Operation

IR transmitter, FM transmitter, FM frequency, source
names and Audio levels can be adjusted for all available
sources.
• Once this adjustment is made, all sources are affected.
SELECT
1
Press and hold SELECT for at least 2
seconds to show the SETUP menu.
2
Press SELECT twice to switch to SYSTEM
screen.
3
Press
or
to change each mode
IR TRANS:
Press
and
to select A/B/OFF. (Default: A)
FM TRANS:
Press
and
to select FM Radio region (OFF/
USA/JPN). (Default: OFF)
FM FREQ:
Press
and
to select desired FM Radio
Frequencies between 88.1 MHz to 92.5MHz
for USA and 88.1 MHz to 90.0 MHz for Japan.
(Default: 89.1 MHz)
• USA frequency step is 0.2MHz and Japan is
0.1MHz.
SOURCE NAME 1:
Press
and
to select AUX1/DVD/DVD-HU/TV/
GAME/USER (Default: DVD)
SOURCE NAME 2:
Press
and
to select AUX2/DVD/DVD-HU/TV/
GAME/USER/OFF* (Default: TV)
TW_PKG-RSE.indb EN9
TW_PKG-RSE.indb EN9
ENT
Front Panel Controls
ENT
SELECT
Remote Control
SOURCE NAME 3:
Press
and
to select AUX3/GAME/USER/OFF*
(Default: GAME)
• When OFF is selected, source selection skips to
the next input. (AUX1 cannot be turned OFF .)
AUDIO LEVEL 1 (Setting for Aux1):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 2 (Setting for Aux2):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 3 (Setting for Aux3):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
FACTORY DEFAULT:
Press ENT Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
Customizing Source Name
Your desired OSD source name can be defi ned up to 6
characters.
4
Press
and
to select USER.
5
Press ENT key. Character setting menu
appears.
6
▲ ▼
Press
and ENT key to select the
character "A-Z", "0-9", "-", space and ".".
"DEL":
Delete one character at a time.
"CLR":
Clear entire characters.
"OK":
Confi rm source name and exit
from character setting menu.
• This setting will not disappear until selecting OK to exit
the screen.
9
-EN
4/25/05 4:51:14 PM
4/25/05 4:51:14 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pkg-rse1

Table of Contents