Bt Hands Free Calling; (Ive-W530Ebt/Ive-W530Abt Only); Setup Before Using; About Bluetooth - Alpine IVE-W530E Owner's Manual

BT Hands Free
Calling

(IVE-W530EBT/IVE-W530ABT only)

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 metres. For details, refer to the BLUETOOTH
Home page (http://www.BLUETOOTH.com/).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the
connected device(s).

Before Using Hands-Free Function

Before using the hands-free phone/audio function, the following
settings need to be made.
Set "BLUETOOTH IN" to HFP or HFP+Audio (page 32).
• Before using a hands-free phone, it must be paired with this unit.
Refer to "BLUETOOTH Setup" (pages 33-34).

How to connect to a BLUETOOTH

compatible device (Pairing)

For details on the control from a BLUETOOTH compatible device,
refer to the Owner's Manual of the BLUETOOTH compatible device.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
2
The PIN code ("0000") is displayed on the screen.
3
Input the PIN code ("0000") in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, "Connected/
(Device name)" is displayed, and then the unit
returns to normal mode.
* Depending on the BLUETOOTH compatible device used, the
confirmation prompt may not appear.
• When pairing a BLUETOOTH compatible device with SSP (Secure
Simple Pairing), a message "Connect/(Security Code)/Yes/No" will
be displayed, touch [Yes] to connect.
• Set "Setting the Search Mode" (page 34) to Visible Mode ON to
enable this unit to recognise a mobile phone. For mobile phone
passkey (passcode) input operation, refer to the mobile's Owner's
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to "Registering the BLUETOOTH Device"
(page 34).
• If a BLUETOOTH compatible device is successfully paired, the next
time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.

BLUETOOTH Setup

BLUETOOTH Setup Operation

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
• While calling, or in the BLUETOOTH Audio source, BLUETOOTH
Setup operation cannot be performed.
• Check that "HFP" or "HFP+Audio" is selected in "Setting the
BLUETOOTH Connection (BLUETOOTH IN)" (page 32), and then
perform BLUETOOTH Setup operation.
1
Touch [ ] on the main source screen.
The SETUP main screen is displayed.
2
Touch the title bar of Source Setup.
The Source Setup screen appears.
3
Touch the title bar of BLUETOOTH Setup.
The BLUETOOTH Setup screen appears.
4
Touch [ ], [ ] or the title bar of the desired item to
change its setting.
Setting items:
Paired Devices / Device Search / Clear Device /
Service Provider / Visible Mode / Auto Answer / Speaker Select /
MIC Input / Firmware Version / Firmware Update / BT Menu
Language / Shortcut Memory
5
Touch [ ] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
Setting the BLUETOOTH Device
Select one of 3 connected BLUETOOTH compatible devices that
you previously registered.
Setting item: Paired Devices
Touch a BLUETOOTH compatible device to use (change
connection) from the Paired Device list.
• If the connection is successfully changed, "Connected/(Device
name)" is displayed for 2 seconds, and then the display returns to the
Setup screen.
• If you input the wrong passcode or communications fail, "Failed" is
displayed.
• If you want to connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to change to.
• Up to 3 BLUETOOTH compatible devices can be registered to this
unit. If all 3 positions have been registered, you cannot register a 4th
device. To register another device, you need to delete one of the
devices from position 1 to 3 first.
33
-EN