Table of Contents
Advertisement
8.3.
Adjustment procedures
8.3.1.
Read Lens Barcode
1. Preparation of the SD CARD
a. Format the SD card.
b. Put PDCE570C.elf, cal.txt, LENSSN.TXT into the SD card on root directory.
c. Make sure that the content text of cal.txt is "PDCE570a cal menu".
d. Write the S/N of the lens onto the file LENSSN.TXT for example:0510520302735337124.
2. Input the Lens Barcode data
a. Set the battery to the camera.
b. Insert the SD card.
c. Press shutter button and power button at the same time and continuously until the calibration mode is displayed.
d. Select "UpdateOISFw" (fig.1-A), then press "MENU/SET" button (fig.1-B), then press "Down" key to start the auto CAL
process.
e. The parameters will be saved automatically once CAL process finish.
f. The LCD show "Read BarCode From SD Card OK!000" if succeed, show NG code if fail.
g. Turn off the power to complete calibration. (Other adjustments can be continued by pushing the "MENU/SET" button.)
22
Advertisement
Table of Contents
