Devices To The Component In Connection - Loewe Art 37 Operating Instructions Manual

Operating additional equipment

Devices to the Component IN connection

DVD players/recorders or a Set-Top-Box with Component Video con-
nections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-
COMPONENT) of the TV set instead of to the EURO-AV sockets.
The connecting cable with three cinch plugs each transfers the picture
information with a better quality than a EURO-AV cable. You need another
cable for the sound transmission.
Connecting the device
➠ Device to COMP. IN is registered with the connection
wizard.
Switch off all equipment before connecting.
Connect the Component Video outputs of the external
device by a triple cinch cable to the Cb/Pb Cr/Pr Y sockets
of the TV set.
Connect the analogue audio outputs of the external
device to the AUDIO IN1 L/R sockets of the TV set by a
dual cinch cable.
Connection
example of a
Set-Top-Box
AUDIO IN1 L/R
Alternatively, connect the digital audio output of the exter-
nal device to the AUDIO DIGITAL IN socket of the TV set
with a cinch cable.
The digital audio input can be assigned to the COMP. IN
socket by TV menu
digital audio input, see page 53.
- 50
Cb/Pb Cr/Pr Y
Set-Top-Box with
COMPONENT OUT
Connections Miscellaneous
Playback from the device
Call AV selection.
Select COMP. IN socket,
OK switch over.
Adapt geometry (only possible with certain signals)
This can be used to position the picture correctly and move the position of
the picture (horizontally and vertically) so that it fills out the whole screen.
Call TV menu.
 Select Geometry,
 go to the menu line below.
TV set
Select the desired setting,
 go to the menu line below.
Make settings.
Assign
AV selection
COMP. IN
OK
HDMI3/DVI
HDMI2/DVI
HDMI1/DVI
PC IN
AVS
DVD-REC
AV1
VIDEO
Switch to ...
OK
END