Keypad Features - NAPCO Gemini GEM-X255 Installation Instructions Manual

!
Page 6
!
800 Event Log.
!
Overview Mode permits monitoring and control of total system from one keypad.
!
Guard-Tour programmable for start time, tour length, and check points (tour stations).
!
Two programmable Entry Delay times.
!
Two Interior-Zone groups (when used with GEM-RP1CAe2 / GEM-K1CA keypads).
!
Dynamic battery test interrupts charging and places battery under load every four hours.
!
Chime by zone; programmable duration.
!
Non-volatile RAM retains memory during power losses.
!
Quickloader programmable.
!
Auto-Download Log.
! Exclusive V.A.L.I.D. feature (Verifying Automatic Line-Integrity Diagnostic) reduces false alarms due to changes in
line resistance.
Communicator Features
! Compatible with all major receiver formats, including BFSK, 4/2, Modem 2, SIA, 4/3/1, 4+2 Express and Point ID.
!
Rotary dial, TouchTone
!
Three 20-digit telephone numbers.
!
Backup Reporting; Double Reporting; Split Reporting.
!
195 User Codes with Open/Close Reporting by user.
!
AC Failure Reporting with programmable report delay.
!
Supervised telephone line with programmable delay.
!
Pager capability.
!
GEM-ACM1D and GEM-2D Access Control Modules provide integrated access control to the burglary alarm functions
of the GEM-X255 control panel.

Keypad Features

!
English-language LCD display; LED and sounder annunciators.
!
Supports up to fifteen 4-wire keypads.
!
Access only capability.
!
Provisions for fire, police, auxiliary and ambush panic alarms.
! Integral 4-zone EZM included in each keypad (GEM-RP1CAe2/GEM-K1CA only).
! Communicator Test to Central facilitates testing; Locate, Fault-Find and EZM-Locate diagnostics simplify trouble-
shooting.
! PGM output.
!
The NAPCO NetLink™ system allows the reporting of alarms over a TCP/IP based (Intranet or Internet) network
X
GEM-X255 Installation Instructions
TM TM
only, and TouchTone with Rotary backup.
WI1093C 3/04
L
NAPCO Security Systems