Kenwood KDC-105U Instruction Manual page 11

Wiring connection
KDC - 105U KDC - MP105U
R L
Rear/subwoofer output
Antenna terminal
To front speaker (left)
White/Black
To front speaker (right)
To rear speaker (left)
Green/Black
To rear speaker (right)
Purple/Black
Ignition switch
Car fuse box
Red
(Ignition wire)
Yellow
Car fuse box
(Battery wire)
Black (Ground wire)
To the metallic body or
chassis of the car
Battery
R L
Front output
Rear/subwoofer output
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
White
Light blue/yellow
(Steering remote control
wire)
Gray
Gray/Black
Blue/White
Green
(Power control wire)
Purple
Brown
(Mute control wire)
Blue
(Antenna control wire)
STEERING WHEEL
KDC - MP105U
REMOTE INPUT For :
To the steering wheel remote control adapter
REMOTE CONT
To the power control terminal when using the
optional power amplifier, or to the antenna control
P. CONT
terminal in the vehicle.
To the terminal that is grounded when either the
telephone rings or during conversation.
(To connect the Kenwood navigation system, refer
MUTE
your navigation manual.)
(Not used)
ANT CONT
Part list for installation
A Faceplate
( ×1 )
B Mounting sleeve
( ×1 )
C Trim plate
( ×1 )
D Wiring harness
( ×1 )
E Extraction key
( ×2 )
F Flat head screw
( ×4 )
G Round head screw
( ×4 )
ENGLISH | 11