Thank You; Writing Conventions Followed In This Manual - Kenwood TH-K40A Instruction Manual

THANK YOU

We are grateful you decided to purchase this KENWOOD FM transceiver.
KENWOOD always provides Amateur Radio products which surprise and excite
serious hobbyists. This transceiver is no exception. KENWOOD believes that
this product will satisfy your requirements for voice communication.
MARKET TYPE CODES
K: The Americas
E: Europe
M: General
The market type code is printed on the bar-code label of the carton box.

WRITING CONVENTIONS FOLLOWED IN THIS MANUAL

The writing conventions described below have been followed to simplify
instructions and avoid unnecessary repetition.
Instruction
Press [KEY].
Press [KEY] (1s).
Press [KEY1], [KEY2].
Press [F] - [KEY].
Press [KEY] + Power ON.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU
countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable
of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains lead.
Firmware Copyrights
The title to and ownership of copyrights for firmware embedded in KENWOOD product memories
are reserved for JVC KENWOOD Corporation.
WHEN CONDENSATION OCCURS INSIDE THE TRANSCEIVER
Condensation may occur inside the transceiver in such a case where the room is warmed using
a heater on cold days or where the transceiver is quickly moved from a cold room to a warm room.
When condensation occurs, the microcomputer and/or the transmit/receive circuits may become
unstable, resulting in transceiver malfunction. If this happens, turn OFF the transceiver and just
wait for a while. When the condensation droplets disappear, the transceiver will function normally.
Momentarily press KEY.
Press and hold KEY for 1 second or longer.
Press KEY1 momentarily, release KEY1, then press
KEY2.
Press the F key to enter Function mode, then press
KEY to access its secondary function.
With the transceiver power OFF, press and hold
KEY while turning the transceiver power ON.
Action