Service Port; Time&Date - Cortelco C56 User Manual

Hide thumbs Also See for C56:

Table of Contents

5.3.2.3

Service Port

Set the port values for Telnet/HTTP/RTP on this page.

Field Name

Web Server Type

HTTP Port

Telnet Port

RTP Port Range Start

RTP Port Quantity

Notes:

1. Any changes made on this page require a reboot to become active.

2. It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.

Values less than 1024 are reserved.

3. If the HTTP port is set to 0, HTTP service will be disabled.

5.3.2.4

TIME&DATE

Set the time zone and SNTP (Simple Network Time Protocol) server on this page. Daylight

savings time configuration and manual time and date entry are also done on this page

Specify Web Server Type – HTTP or HTTPS

Port for web browser access. Default value is 80. To enhance

security, change this from the default. Setting this port to 0 will

disable HTTP access.

Example: The IP address is 192.168.1.70 and the port value is 8090,

the accessing address is http://192.168.1.70:8090.

Port for Telnet access. The default is 23.

Set the beginning value for RTP Ports. Ports are dynamically

allocated.

Set the maximum quantity of RTP Ports. The default is 200.

- 22 -

Explanation

Table of Contents