Advertisement
ENSURE THAT CABLE CLAMP
IS SECURELY ATTACHED TO
THE CHASSIS OF THE HEATER.
CONNECTING THE MAIN'S SUPPLY CABLE
7
Remove the inner front panel; this carries on it's inner face the front insulation
slab. Handle this with care, the insulation must not de damaged.
REMOVE ALL THE PACKING CARDBOARD FROM INSIDE THE STORAGE
BRICK COMPARTMENT, IF LEFT INSIDE IT WILL BE SET ON FIRE WHEN THE
HEATER IS SWITCHED ON. ENSURE THAT ALL PACKAGING MATERIAL IS
REMOVED FROM THE BRICKS BEFORE FITTING THEM.
WARNING
MAINS TERMINALS
IMPORTANT: for earthing, loosen the earth screw sufficiently to
wrap the mains' earth wire around it between flat washer and
cup washer, and retighten the earthing screw.
Feed the mains cable through the cable clamp and make
connections as marked on the heater. Pull back any slack
through the clamp and tighten clamping screw. Make sure
clamp is tightening on outer sheath of cable and not on
individual conductors.
79331/4/6S
Some heater variants my have other charge periods or
acceptances. See heater rating plate.
Charge Period
7 hours
6
Rated Charge
6 kWh
Advertisement
