1.
To make assembly easier, read the information
on page 5 before you begin assembling the
elliptical exerciser.
Identify the Stabilizer (9) which has round Endcaps
(21) on the ends. While another person lifts the front
of the Frame (1), attach the Stabilizer to the Frame
with two M10 x 75mm Carriage Bolts (34) and two
M10 Nylon Locknuts (33).
2. While another person lifts the back of the Frame (1),
attach the other Stabilizer (9) to the Frame with two
M10 x 75mm Carriage Bolts (34) and two M10 Nylon
Locknuts (33).
3. The Console (23) requires four 1.5V "D" batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the elliptical exerciser has been
exposed to cold temperatures, allow it to warm to
room temperature before inserting batteries into
the Console. If you do not do this, the console
displays or other electronic components may
become damaged. Remove the battery cover from
the Console, and insert four batteries into the
Console. Make sure that the batteries are oriented
as shown by the markings on the battery cover.
Then, reattach the battery cover.
1
34
34
21
2
33
3
6
21
1
9
33
33
9
1
34
23
Batteries
Battery
Cover
Batteries