Sennheiser ew 300 IEM G2 Instructions For Use Manual page 59

Rack mounting the SR 350 IEM G2
twin transmitter
Rack mounting the SR 300 IEM G2
transmitter
12
The rack mount "ears" are already fitted to the twin transmitter on delivery.
To mount the twin transmitter into a 19'' rack:
Slide the twin receiver into the 19'' rack.
Secure the rack mount "ears" to the rack using four screws (not included).
For mounting one or two transmitters into a 19" rack, you require the GA 2
rack adapter. The GA 2 rack adapter consists of:
2 rack mount "ears"
1 blanking plate
1 jointing plate
2 blanking plugs for closing off unused BNC holes
12 recessed head screws M 3x6
2 recessed head screws M 6x10
To mount two transmitters
Place the two transmitters side by side upside-down onto a flat surface.
Align the jointing plate
transmitters.
Secure the jointing plate
recessed head screws (M 3x6).
Hook the two rack mount "ears"
Secure the rack mount "ears" to the transmitters using two of the
supplied recessed head screws (M 3x6) respectively.
Slide the transmitters into the 19" rack.
Secure the rack mount "ears" to the rack.
side by side into a rack:
over the holes in the bottom sides of the
to the transmitters using eight of the supplied
to the front panels of the transmitters.