Calibrating A Pressure Transmitter - Fluke 725Ex User Manual

Calibrating a Pressure Transmitter

The following example shows how to calibrate a pressure
transmitter.
Connect the Calibrator to the instrument under test as
shown in Figure 20. Proceed as follows:
l
1. Press for current (upper display). If required,
l
press again to activate loop power.
U
2. Press (lower display).
M
3. If necessary, press
4. Zero the pressure module.
5. Perform checks at 0 % and 100 % of span and adjust
the transmitter as necessary.
for SOURCE mode.
Calibrating a Pressure Transmitter
43