Download Print this page

Fisher & Paykel DD24DCB7 Quick Start page 2

Quick start ph7 lcd txt aa us (english)
Hide thumbs Also See for DD24DCB7:

Advertisement

During and after the wash
As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different
programs will go through different stages). When the program has finished, the display will show
beep six times.
Dirty dishes
Pre-rinsing
Washing
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists
with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
Dos and don'ts of loading
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
Ensure that water reaches all items on
the adjustable racks.
and the dishwasher will
These lines may remain on after
the program has finished to
indicate that the drying fan is
still running.
min
Rinsing
Drying
Clean dishes -
program has finished
Protruding items will stop the
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
Overcrowding reduces wash
performance.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
Dishware is blocking water from
reaching items on the adjustable
racks.
Preference options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
Water
Open drawer auto
Option
Rinse aid
softener*
power-on
Regulates the amount of
Refer to
Your dishwasher
rinse aid dispensed. Reduce
the 'Water
is factory-set to
this setting if there is excess
softener'
automatically
foam after a wash. Increase
section of
power on for 30
this setting if dishes are wet
the 'User
seconds whenever
What
or streaky after a wash.
guide' for
you open the
does
details.
drawer.
it do?
You can turn this
setting off.
How to change the setting of an option
1
CHECK & OPEN
Check that there is no wash underway, press
, then open the drawer.
ENTER MENU & SCROLL TO OPTION
2
To enter the menu: press the
selector on top first with one finger, then the
until one long beep sounds, then release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
. To know which option you're in, watch the letters in the display (see table below).
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
Water
Option
Rinse aid
softener*
Which option
am I in?
Possible
1 to 5
0 to 5
settings
Example
4 indicators lit = setting is 4
CHANGE SETTING
3
Press
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press
3 times.
SAVE SETTING & QUIT MENU
4
Press
. This will save the new setting and quit the preference options menu.
*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
For more info
For detailed information on the
see your 'User guide'
features of your dishwasher
For warranty information
see your 'Service and warranty' booklet
If you...
see your 'Service and warranty' booklet or contact us
have any questions or comments
NZ
need a Fisher & Paykel authorized
AU
technician to service your product
USA
need replacement parts or accessories
CA
want to register your product
Beeps at end of
Closed drawer autolock
wash
Your dishwasher
When this setting is on,
is factory-set to
the drawer will
beep six times
automatically lock 30
at the end of a
seconds after it's closed.
wash.
It can then be unlocked by
You can turn this
pressing
(unless Keylock
setting off.
or Childlock is also activated).
Useful in boats or motor
homes.
button on the front with another finger, hold both
Open drawer
Beeps at end
Closed drawer
auto power-on
of wash
autolock
On or Off
On or Off
On or Off
On
On
On
Off
Off
Off
0800 372 273
www.fisherpaykel.co.nz
toll-free, 24/7
1300 650 590
www.fisherpaykel.com.au
toll-free, 24/7
toll-free, 24/7
1 888 936 7872
www.fisherpaykel.com
toll-free, 24/7
1 888 936 7872
www.fisherpaykel.ca
Clean dish indication
When this setting is on,
will remain in the
display after a wash to
remind you that the dishes
are clean. This is useful if
you prefer storing clean
dishes in your dishwasher,
taking out only what you
need. When the last clean
dish has been removed,
press
to return to
normal operating mode.
Clean dish
indication
On or Off
On
Off
590191B
09.12

Advertisement

loading

This manual is also suitable for:

Dd24dchtx7Dd24dctb7Dd24dctw7Dd24dctx7Dd24dcw7Dd24dcx7 ... Show all