Use Speaker Mode; Switch To And From Speaker During Call; Headsets; Bluetooth Wireless Headsets - Cisco 7925G User Manual

Handset, Headset, and Speakerphone

Use Speaker Mode

You can activate the speakerphone before making a call or during a call. The speaker mode remains active
for future calls until toggled off. You can activate the speakerphone (on the phone) even when the phone is
docked in the desktop charger and connected to a wired headset.
Procedure
Press and hold

Switch To and From Speaker During Call

Procedure
Step 1
To switch to speaker mode, press and hold
Step 2
To switch from speaker mode to handset mode, press and hold

Headsets

Your phone supports wired headset jack types with a 2.5 mm, 3-band, 4-connector plug. For information
about purchasing headsets, see

Bluetooth Wireless Headsets

Your phone supports the use of Bluetooth wireless headsets. Enable the Bluetooth setting on your phone
before performing tasks such as scanning, pairing, and unpairing.
Note Before pairing the Bluetooth headset with the phone, follow the instructions in the headset documentation
to enable it for operation.
Tips
• Only one Bluetooth device can be connected to the phone at one time.
• A Bluetooth device must remain within 10 m of the phone to keep the connection.
• A Bluetooth device disconnects if the phone is turned off or if Bluetooth is disabled on the phone.
until the icon appears.
Headset Information, on page
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
until the icon appears.
to toggle back to the handset.
26.
Use Speaker Mode
109