www.gateway.com
Important
The color and shape of your replacement drive's front cover may
vary from your original drive.
3
If you are installing a new drive, go to
- OR -
If you are replacing an existing drive, disconnect the
cables from the drive, noting their locations and
orientation. You will reconnect the cables after you
install the new drive.
4
Remove the thumbscrew from the diskette drive.
5
Slide the drive release latch back to unlock the drive,
then slide the drive forward and out of the drive bay.
6
Slide the new drive into the drive bay.
7
Slide the drive release latch forward to lock the drive
into place. You do not need to replace the thumbscrew
because it was originally installed for shipping
purposes.
8
Reconnect the drive cables using your notes from
Step
3. If you are installing a new drive, follow the
manufacturer's instructions.
Thumbscrew
Step
6.
51