Supermicro H8DGG-QF User Manual page 68

H8DGG-QF SERVERBOARD USER'S MANUAL
Offboard PCI/ISA IDE Card
Some PCI IDE cards may require this option to be set to the PCI slot number
that is holding the card. The Auto setting works for most PCI IDE cards. Options
include Auto, PCI Slot 1, PCI Slot , PCI Slot 3, PCI Slot 4, PCI Slot 5 and PCI
Slot 6.
Load Onboard LAN Option ROM
This option Enables or Disables the onboard LAN option ROM.
IRQ3 ~ IRQ15 Settings
These settings specify if IRQ is available to be used by PCI/PnP devices or is
reserved for use by legacy ISA devices. Options are Available or Reserved.
DMA Channel 0 ~ DMA Channel 7 Settings
These settings specify if a DMA Channel is available to be used by PCI/PnP
devices or is reserved for use by legacy ISA devices. Options are Available or
Reserved.
Reserved Memory Size
This option specifi es the size of the memory block reserved for legacy ISA
devices. Options include Disabled, 16k, 32k or 64k.
HotPlug Reserve I/O Port Size
This option sets the size that the I/O port block reserves for HotPlug or CardBus
devices. Options include Auto, 4k, 8k, 12k, 16k, 20k, 24k and 28k.
HotPlug Reserve Memory Size
This option sets the size of the memory block that is reserved for HotPlug or
CardBus devices. Options include Auto, 8M, 16M, 32M, 64M, 128MB, 256MB
and 512MB.
Hotplug Reserve PFMemory Size
This option sets the size of the memory block that is reserved for HotPlug or
CardBus devices. Options include Auto, 32M, 64M, 128MB, 256MB, 512MB,
1024M and 2048M.
4-14