Remote And System Operations; Passive Arming; Valet Mode - Viper 3100 Owner's Manual

Remote and System Operations

Passive Arming

Park and exit the vehicle, after the doors are closed the Passive arming
countdown begins. The led flashes quickly and after 30 seconds the
system arms itself.
Anytime before the system arms you can re-enter the vehicle or
open the trunk to load or unload items and, after closing passive arm-
ing resumes.
To stay secure in case of accidental disarming the system, if a
door is not opened within 30 seconds the system re-arms itself.
Note: This is a programmable option.

Valet Mode

Valet mode can be entered and exited by performing the Remote Valet
command or manually using the vehicle key and the valet button. Valet
Mode defeats the alarm features while the convenience features still
operate normally.
Use the following steps to manually enter and exit Valet Mode:
Turn the ignition On and then Off
1.
Immediately press and release the valet button once
2.
3. The status LED turns On when entering and Off when exiting.
You can also enter or exit Valet Mode by using the remote:
1. Open any vehicle door.
2. Press
The LED system status indicator lights solid when you enter Valet Mode
and turns off when you exit Valet Mode.
© 2011 Directed Electronics. All rights reserved.
and then press AUX. Press
again.
9