Panic Mode; Valet Mode - Viper 3102V Owner's Manual

is armed using Silent Mode. This ensures that no chirps will be emitted
by the siren in an area you want chirp-free. The system is still capable
of triggering, but the Warn Away® response is bypassed.

Panic mode

AUX
AUX
If you are threatened in or near your vehicle, you can attract attention
AUX
by triggering the system with your remote.
Press for approximately two seconds, to enter Panic Mode. The
siren sounds and the parking lights flash for the programmed siren
P
duration. To stop Panic Mode at any time, press

Valet mode

You can prevent your security system from automatically arming and
trig ger ing by using Valet Mode. This is very useful when washing the
ve hi cle or having it serviced. In Valet Mode, the security system will
not arm, even with the remote trans mit ter, but all convenience functions
(door locks, trunk re lease, etc.) will continue to work nor mal ly.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet switch within 10 seconds.
The status LED lights solidly if you are en ter ing Valet Mode, and goes
out if you are exiting Valet Mode.
To enter or exit Valet Mode with the remote:
Open any vehicle door, and then quickly press the following buttons
in the sequence indicated.
1. Press .
© 2013 Directed. All rights reserved.
AUX
AUX
AUX
AUX
or
P
DRW-226
.
AUX
9