Technical Specifications; Power Requirements; Over-Current Protection; Operating Environment - Cisco TelePresence Server 7010 Installation Manual

Technical specifications

Technical specifications

Power requirements

Table 3: TelePresence Server ratings
Rating
Current rating
Supply voltage range

Over-current protection

Ensure the supply to this unit is protected by a branch circuit protector rated by a maximum of 20A.
CAUTION: Over-current devices must meet applicable national and local electrical safety codes and be
approved for the intended application.

Operating environment

The unit must only be used within the following environmental conditions:
Table 4: Operating environment
Environment
Operating environment
Non-operating environment
Optimum operating environment

Anti-static precautions

When servicing or removing components or connections, first attach an anti-static wrist strap to an
appropriate earth point.
Cisco TelePresence Server 7010 Installation Guide
Value
9A Maximum
100 to 240V 50/60 Hz
Temperature
0°C to 35°C
-10°C to 60°C
21°C to 23°C
Humidity
10% to 95%
(non-condensing)
10% to 95%
(non-condensing)
45% to 50%
(non-condensing)
Page 13 of 14