Table of Contents
Advertisement
6.3.4 Find a POI
You can select your destination from the thousands of POIs included with The
NVX225 Navigator or from the ones you have previously created. This screen helps
you find the one you are looking for. POI items are categorized to let you locate them
more easily. On this screen you can see the first page of the top level POI
categories. There are three levels altogether.
The search will be carried out around a certain reference point. Always look at the
current reference point shown in the green field above the POI category buttons and
confirm that it matches what you want. To change the reference, tap the Change ref.
button in the top right corner.
Once you tap the Change ref. button, you are presented with these choices:
Address: you can specify an address to be searched around, or a settlement
to search in. The centre of this settlement will be used as the reference point.
History: the reference for the search can be selected from the History list.
Coordinates: you can specify a latitude/longitude pair to be the centre of the
search.
GPS Position: the search will be carried out around the current location given
by the GPS if it is available. If no GPS position is available, the last known
GPS position (grey arrow on the map) will be used.
Cursor: the search will be carried out around the previously selected map
point.
Destination: the search will be carried out around the destination of your
current route.
89
Advertisement
Table of Contents
