Table of Contents
Advertisement
4.6 Route Information screen
The Route Information screen has all the data and some of the functions you need
while you navigate. Some additional functions can be found in the Route menu
(4.7.3). Without an active route one of the buttons is inactive and route data cannot
be displayed.
As a reminder, you can open this screen three ways: tapping the Info button in the
Route menu (4.7.3.6), tapping one of the Route Data fields on the Cockpit screen, or
pressing the 3rd hardware button.
4.6.1 Route data displayed (for destination and via points)
In the top section of the screen you see information about the current route. These
fields are continuously updated while you keep this screen open.
When you open the screen, all fields contain information on reaching your final
destination. Tap any of the fields to see data on the via points starting from the first
one through the final destination again.
4.6.1.1
Route line
The upper part of this screen shows your planned route as a horizontal line. Its
leftmost point is the start of the route, the rightmost one is the final destination, and
you can see you're via point flags along the line, spaced in proportion to their
distance.
The blue (yellow at night) arrow representing your position will travel from the left to
the right, giving you visual feedback of your journey.
When you reach a via point, it becomes the starting point of the route, the past will be
deleted, the line with all the other via points will be modified instantly, and the arrow
jumps back to the left.
When The NVX225 Navigator needs to recalculate the route, the arrow will not jump
back to the left as when reaching a via point, but it may drift a bit as the length of the
new route may be different from the previous one.
41
Advertisement
Table of Contents
