Table of Contents
Advertisement
NVX225 Navigator. A red icon (4.5.12) is shown on the map screens to let you
know that a recording is in progress. Tapping that icon opens this Track Log
screen.
Stop recording: if recording is in progress, this buttons stops it.
Info: this button opens a screen that shows the track log details, and lets you:
o Change the name of the track log (Rename button),
o Change the color of the track log (Color on the map selector),
o Have it displayed on the map (Fit to screen button), or
o Export the data to the SD card in GPX format (Export button).
Replay: push this button to see a simulation of the saved track log on the map.
A green icon (4.5.12) will appear on the map screens to let you know it is not a
fly over but a simulation based on a real saved log.
Delete: you can delete a track log if it is not needed any more. The NVX225
Navigator will ask you to confirm this action.
Track log options: this button in the upper right corner leads to a settings
screen where you can set up the track logging parameters:
o Update interval is how often track points will be saved. Position
information is normally received once a second from the GPS. If you do
not need such a detailed log, you can increase this number to save
track log space.
o Current auto save track size: this figure shows how much memory the
automatically saved track logs use.
o Enable auto-saving: when auto-saving is enabled, you do not need to
turn track log saving on and off manually. The NVX225 Navigator will
automatically start recording the track log as soon as GPS position is
available.
51
Advertisement
Table of Contents
