Harman Kardon AVR 2700 Owner's Manual page 54

AVR
Table A12 – Surround Modes – continued
Surround Mode
DTS Neo:6 DTS Neo:6 analog processing is available with DTS and DTS 96/24 signals and
Mode Group two-channel analog or PCM signals to create a 3-, 5- or 6-channel presentation.
DTS Neo:6 Depending on the number of speakers in your system, select 3-, 5- or 6-channel
Cinema modes, enhanced for movie or video presentations.
DTS Neo:6 Available only in 5- and 6-channel modes, creates a surround presentation
Music suitable for music recordings.
Logic 7 A HARMAN proprietary technology, Logic 7 technology enhances two-channel
Mode Group and matrix-encoded recordings by deriving separate information for the surround
back channels. It provides more accurate placement of sound, improves panning
and expands the sound field, even when used with 5.1-channel systems.
Logic 7 technology uses 96kHz processing and is available in 5.1-or 7.1-channel
modes. Three variants are available.
Logic 7 Especially suited to two-channel sources containing Dolby Surround or matrix
Movie encoding, Logic 7 Movie mode increases center-channel intelligibility. The AVR is
programmed at the factory to default to this mode for two-channel signals.
Logic 7 Logic 7 Music mode is well suited to conventional two-channel music recordings.
Music
Logic 7 Use Logic 7 Game mode to enhance enjoyment of video-game consoles.
Game
5-Channel Stereo Useful for parties, the left- and right-channel information is played through both
the front and surround speakers on each side, while the center speaker plays a
summed mono mix.
7-Channel Stereo Expands the 5-Channel Stereo presentation to include the surround back channels.
2-Channel Stereo Turns off all surround processing and plays a pure two-channel signal or a downmix
of a multichannel signal. The signal is digitized and bass management settings are
applied, making it appropriate when a subwoofer is used.
54
Description Incoming Bitstream or Signal
See below
See below
Appendix