Table of Contents
Advertisement
Chapter 17: Troubleshooting
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
You see a "Disk is full" error message
Delete unnecessary files on the diskette.
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
Run Error checking on the diskette. For more information, see "Checking
the hard drive for errors" on page 219. If errors are detected and corrected,
try using the diskette again.
You see a "Non-system disk", "NTLDR is missing", or "Disk error"
error message
Eject the diskette from the diskette drive, then press E
Make sure that the diskette you are using is IBM-compatible.
Display
The screen is too dark
Adjust the brightness using the system keys. For more information, see
"System key combinations" on page 39.
The screen resolution is not correct
Change the screen resolution from the Display Properties dialog box. For
more information, see "Adjusting the screen resolution" on page 174.
Help and
Support
The text on the display is dim or difficult to read
Adjust the brightness using the system keys. For more information, see
"System key combinations" on page 39.
Change the display settings. For more information, see "Adjusting the
screen and desktop settings" on page 172.
256
For more information about changing the screen resolution
in Windows XP, click Start, then click Help and Support.
Type the keyword screen resolution in the HelpSpot
Search box
www.gateway.com
.
NTER
, then click the arrow.
Advertisement
Table of Contents
Troubleshooting
