Behringer CHORUS SPACE-D CD400 Manual

CHORUS SPACE-D CD400
Digital 3-Dimensional Sound Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER CHORUS SPACE-D CD400.
This ultimate effects pedal is designed to suit almost any application you can think of. Add a breathtaking
third dimension to your sound or instrument and experience the secret weapon of professional
recording studios.
The chorus effect adds a shifting detuned signal to the original, similar to playing in unison in a
group of instruments, and it is often used for dispersing sounds.
1. Controls
(2)
(1)
(5)
(8)
(1) The LEVEL control adjusts the effect sound level.
(2) The EQ control allows you to shape your overall effect sound. Turning it to the right
will emphasize high frequencies while turning to the the left will cut them.
(3) The RATE control determines the chorus effect speed.
(4) Turn up the DEPTH control to achieve a fuller and deeper effect sound.
(5) The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
(6) Use the footswitch to activate/deactivate the effect.
(7) Use this 1/4" TS IN connector to plug in the instrument cable.
(8) The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors if
you want to achieve full stereo chorus effect. For mono use plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
(3)
(4)
(7)
(6)